By properly maintaining your tires, you could potentially be avoiding uneven wear, poor performance and possibly even a blowout. According to the National Highway Traffic Safety Administration, tire failures or blowouts are believed to contribute to over 400 deaths and 10,000 injuries in the United States every year. Even with those figures being made public, the surprising factor is that statistics have shown some drivers still fail to follow the basic tire maintenance guidelines that could help to prevent such occurrences. In addition to overloading, under-inflation is one of the leading causes of tire failure. Simply put, this means putting too much air or not enough into the tires. Either of these can cause stress and excessive heat, which can lead to tire problems and may even result in a blowout or a car crash. Many do not realize how much the change in outdoor temperature can actually affect a car, but it can. In fact, it can even affect the rate at which tires lose air and this is especially true during the warm spring and summer months. During a normal month, tires will lose approximately one or two pounds of pressure. During the warmer months, that number is even greater. The best way to avoid any tire-related mishap is to check your tire's pressure every time you fill up your car's fuel tank. At the very least, tire pressure should be checked once every month and prior to leaving for a long road trip. If you are uncomfortable checking the tires yourself, simply stop by the local auto repair shop and ask for assistance. If you do have a blowout while driving, it is crucial that you not panic and slam on the breaks. This may be the first instinct, but it is a very bad move. In doing so, you may end up causing your car to swerve and potentially put you at risk for a much more serious accident. Instead, gradually apply the break until you have regained control over the vehicle. At that time, slowly guide your car to a safe area as far away from the road as possible. The best way to avoid any type of tire failure is to take the appropriate steps to ensure they are in the best working condition possible. This would include regular inspections and checking the air pressure often. With the proper maintenance, a potential problem can be diagnosed before it occurs and will help to ensure you and your family will arrive at your destination safely. |
